Wuxi Flyt New Energy Technology Co., Ltd.

shafi_banner

S2 200w 300w 12v 24v 48v Horizontal Wind Turbine Generator

Takaitaccen Bayani:

1.Low fara sama gudun, 6 ruwan wukake, high iska makamashi amfani
2.Easy shigarwa, tube ko flange dangane na zaɓi
3.Blades amfani da sabon fasaha na daidaici allura gyare-gyaren, dace da gyara aerodynamic siffar da tsarin, wanda bunkasa iska makamashi amfani da shekara-shekara fitarwa.
4.Body na simintin aluminum gami, tare da 2 bearings swivel, sa shi tsira da karfi iska da gudu mafi aminci.
5.Patented m maganadisu ac janareta tare da musamman stator, yadda ya kamata rage karfin juyi, da dace da iska dabaran da janareta, da kuma tabbatar da yi na dukan tsarin.
6.Controller, inverter za a iya daidaita acroding zuwa abokan ciniki' takamaiman bukatun


  • :
  • Cikakken Bayani

    Tags samfurin

    Bidiyo

    Siffofin

    1.Low fara sama gudun, 6 ruwan wukake, high iska makamashi amfani
    2.Easy shigarwa, tube ko flange dangane na zaɓi
    3.Blades amfani da sabon fasaha na daidaici allura gyare-gyaren, dace da gyara aerodynamic siffar da tsarin, wanda bunkasa iska makamashi amfani da shekara-shekara fitarwa.
    4.Body na simintin aluminum gami, tare da 2 bearings swivel, sa shi tsira da karfi iska da gudu mafi aminci.
    5.Patented m maganadisu ac janareta tare da musamman stator, yadda ya kamata rage karfin juyi, da dace da iska dabaran da janareta, da kuma tabbatar da yi na dukan tsarin.
    6.Controller, inverter za a iya daidaita acroding zuwa abokan ciniki' takamaiman bukatun

    Jerin fakitin:
    1.wind turbine 1 sa (hub, wutsiya, 3/5 ruwan wukake, janareta, kaho, kusoshi da kwayoyi).
    2.mai sarrafa iska 1 yanki.
    3. kayan aikin shigarwa 1 saiti.
    4.fila 1 guda.

    Ƙayyadaddun bayanai

    Samfura S2-200 S2-300
    Ƙarfin Ƙarfi (w) 200w 300w
    Ƙarfin Ƙarfi (w) 220w 320w
    Ƙimar Wutar Lantarki (v) 12/24V 12/24V
    Tsawon ruwan wukake (mm) 530/580 530/580
    Babban nauyi (kg) 6 6.2
    Diamita dabaran iska (m) 1.1 1.1
    Lambar ruwan wukake 3/5 3/5
    Gudun iska mai farawa 1.3m/s
    Gudun iskar tsira 40m/s
    janareta 3 lokaci na dindindin magnet mai aiki tare janareta
    Rayuwar Sabis Sama da shekaru 20
    Mai ɗauka HRB ko don odar ku
    Abubuwan ruwan wukake nailan
    Shell Material nailan
    Material Magnet na Dindindin Rare Duniya NdFeB
    Tsarin sarrafawa Electromagnet
    Lubrication Man shafawa
    Yanayin aiki - 40 zuwa 80

    Bukatun taro

    1. Kafin haɗuwa da janareta na iska ko a cikin aiwatar da kulawa, da fatan za a fara karanta jagorar masu amfani da farko.

    2. Don Allah kar a shigar da injin injin a cikin kwanakin damina ko lokacin da ma'aunin iska ya kasance a mataki na 3 ko sama.

    3. Bayan buɗe kunshin, an ba da shawarar yin gajeren kewayawa guda uku na injin turbin iska(sassan jan karfe da aka fallasa ya kamata a dunƙule su tare).

    4. Kafin shigar da injin turbin iska, dole ne a shirya shimfidar walƙiya.Kuna iya tsara wuraren aiki bisa ga ƙa'idodin ƙasa, ko kuna iya tsara su gwargwadon yanayin gida da yanayin ƙasa.

    5.Lokacin da aka haɗa injin injin iska, Duk sassan yakamata a ɗaure su tare da kayan ɗamara da aka ƙayyade a tebur.1.

    5.Lokacin da aka haɗa injin injin iska, Duk sassan ya kamata a ɗaure su tare da kayan ɗamara da aka ƙayyade a cikin tebur2.

    6. Kafin haɗin kai tsakanin iska mai iska da hasumiya mai hasumiya, da fatan za a haɗa nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan uku na hasumiya.Lokacin amfani da hanyar hinge, kowane nau'i na wayoyi ya kamata ya zama ƙasa da 30mm tsayi kuma a nannade shi da tef ɗin Acetate don yadudduka uku, sa'an nan kuma a shafe shi da bututun fenti na gilashi.Tare da wannan hanyar, haɗa nau'i-nau'i guda uku na wayoyi (hankali: haɗin haɗin haɗin waya ba zai iya ɗaukar nauyin hasumiya ba kai tsaye, don haka wayoyi 100mm zuwa ƙasa daga haɗin gwiwa ya kamata a nannade su da tef ɗin manne sannan a cusa cikin bututun ƙarfe. Bayan haka, ana iya haɗa flange injin injin iska da flange hasumiya.

    7.Kafin hawan injin turbin iska, ƙarshen (wanda ya kamata a haɗa shi da mai sarrafawa) na hasumiya gubar ya kamata a yanke murfin insulating don 10mm ko makamancin haka.Sa'an nan kuma dunƙule jagororin fallasa guda uku (da'irar harbi) tare.

    8. A lokacin shigarwa, an haramta yin jujjuya igiyoyin rotor da yawa (ƙarshen iskar injin turbine ko hasumiya na hasumiya ba su da ɗan gajeren lokaci a wannan lokacin).Sai dai bayan an gama duk shigarwar kuma an gama jarrabawa kuma an tabbatar da tsaron ma'aikatan ginin, ana ba da izinin tarwatsa gajerun hanyoyin da za a iya haɗawa da mai sarrafawa da baturi kafin a fara aiki.


  • Na baya:
  • Na gaba: